HEPU P999-HD48 Coolant Concentrate

The Culture of Cooling > HEPU P999-HD48 Coolant Concentrate
ARTICLE NUMBER - P999-HD48

Coolant concentrate that protects the engine against freezing, overheating and corrosion – mixed in a ratio tailored to the climate and application.

Description
Specification
How to prepare the solution?
Comparable quality standards
Safety
Download

HEPU® P999-HD48 Coolant Concentrate (Heavy-Duty, Blue-Green)

HEPU® P999-HD48 is part of the P999 series of HEPU® coolant concentrates for modern cooling systems, from passenger cars to heavy-duty vehicles. Supplied undiluted, it lets the workshop prepare exactly the right mixing ratio for the climate and application, with year-round protection against freezing, overheating and corrosion.

P999-HD48 is the blue-green, heavy-duty concentrate of the series, based on monoethylene glycol with additional anti-corrosion additives. It is specially designed for year-round use in commercial vehicles with their extended thermal requirements, giving optimum protection to the entire cooling system. Mixed 1:1 with demineralised water it protects down to −38 °C.

Key features

  • Made in Germany. Manufactured under strict quality control – consistent and proven. 
  • Heavy-duty long-life formula. Free from borate, nitrite, phosphate and 2-ethylhexanoic acid – additional anti-corrosion additives for optimum protection of the whole cooling system.
  • Built for commercial vehicles – developed for extended thermal loads and year-round use.
  • Permanent all-year protection against frost, overheating and corrosion.
  • Flexible mixing ratio. Supplied as a concentrate; the workshop sets the freeze protection level (down to −38 °C at 1:1).
  • Broad OE and heavy-duty coverage – MAN 324 Typ NF, MB 325.0, MTU MTL 5048, Deutz, Iveco, Fiat, BMW and further international standards (see Comparable Quality Standards).
  • Perfect match for HEPU® water pumps. One system, one manufacturer, full responsibility.

Benefits

  • Reliable engine protection all year round – against freezing, overheating and corrosion, under the highest thermal loads.
  • Heavy-duty anti-corrosion protection – the borate-, nitrite- and phosphate-free formula guards the whole cooling circuit in commercial-vehicle service.
  • Freeze protection tailored to your needs – as a concentrate, the workshop determines the mixing ratio and level of protection.
  • Confidence in the right choice – broad commercial-vehicle OE coverage reduces the risk of incorrect selection.
  • German quality – one consistent, proven standard behind The Culture of Cooling.
  • Consistency with the HEPU® system – the perfect complement to HEPU® water pump kits: one system, one manufacturer, full responsibility.
Parameter Value
Product type Coolant / antifreeze — heavy-duty full concentrate (long-life)
Base Monoethylene glycol (ethanediol) 85–95 %
Inhibitor Organic/hybrid anti-corrosion additive package
Colour Blue-green
Odour Odourless
Density at 15 °C 1.127 g/cm³
pH at 20 °C ~8.7
Freezing point (concentrate) Not determined
Boiling point 160–200 °C
Frost protection (1:1 with water) down to −38 °C
Flash point > 120 °C
Flammability Non-flammable
Vapour pressure at 20 °C < 0.1 hPa
Solubility in water Fully miscible
Free of Borate, nitrite, phosphate, 2-ethylhexanoic acid
Recommended for Commercial vehicles with extended thermal requirements
Application Engine coolant (mix with water before use)

 

HEPU® P999-HD48 is a concentrate and must be mixed with clean water before filling the cooling system.

Method

  1. Use clean, low-mineral water – demineralised or distilled is recommended.
  2. Pre-mix coolant and water in the correct ratio in a clean container. Do not pour concentrate and water separately into the system.
  3. Fill the cooling system with the prepared mixture, bleed air from the circuit and check the level when the engine is cold.
  4. Never run the system on concentrate alone or on water alone.
  5. Do not mix HD48 with incompatible coolant types – always flush the system when switching coolant technology.

Mixing ratio → frost protection

Concentrate : Water Frost protection
50 : 50 −38 °C (verified HEPU figure)
~40 : 60 ~ −25 °C (approx.)
~60 : 40 ~ −52 °C (approx.)

Guidance: keep the concentrate content between 33 % (minimum, for year-round corrosion protection) and 60 % (practical maximum). Higher glycol content does not improve frost protection and reduces heat transfer.


Comparable quality standards

HEPU® P999-HD48 is recommended for use according to the following specifications and standards:

  • AFNOR NF-R 15-601 Type 1 · ASTM D 3306 Type I / D 4985
  • BS 6580 · SAE J1034
  • BMW GS 94000 (N 600 69) · Chrysler MS-9769
  • Deutz DQC CA-14 · DTFR 29C100 (MB 325.0)
  • Fiat 9.55523 · Iveco 18-1830
  • MAN 324 Typ NF · MTU MTL 5048 · S-759
  • Perkins

Always confirm the coolant type and colour required by the vehicle manufacturer before topping up or mixing with another product.

HEPU® P999 is recommended for use according to the following specifications and standards:

  • Audi/VW G11 – TL 774A · Audi/VW G 011 A8C A1
  • MB 325.0 / 325.2 · MB 000 989 08 25
  • Opel 1940 656
  • Ford 1 047 035
  • BS 6580 (UK)
  • ASTM D3306
  • JIS K 2234
  • UNE 26-361
  • AFNOR NF R15-601

Always confirm the coolant type and colour required by the vehicle manufacturer before topping up or mixing with another product.

SAFETY WARNINGS

Hazard-determining components of labelling:
ethanediol

Hazard statements

  • H302 Harmful if swallowed.
  • H373 May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.

Precautionary statements

  • P101 If medical advice is needed, have product container or label at hand.
  • P102 Keep out of reach of children.
  • P103 Read carefully and follow all instructions.
  • P260 Do not breathe dust/fume/gas/mist/vapours/spray.
  • P264 Wash hands thoroughly after handling.
  • P270 Do not eat, drink or smoke when using this product.
  • P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
  • P330 Rinse mouth.
  • P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Full details in the Safety Data Sheet (SDS), available for download.

 

MANUFACTURER AND ENTITY RESPONSIBLE FOR PLACING THE PRODUCT ON THE MARKET

HEPU® Autoteile GmbH
Am Kreuzweg 2, 32689 Kalletal-Hohenhausen
Germany

 

Watch on YouTube

HEPU Tech Academy

All HEPU Tech Academy materials are published on the HEPU® YouTube channel – free of charge, organised into structured series and useful at every stage of the repair process. At the workstation, before starting a repair. At the counter, when a customer asks a question. On a mobile device between jobs.

Subscribe to the channel to stay up to date with the latest installation procedures, new product developments and technical case studies.

HEPU® Coolant Catalogue

Discover the complete range of HEPU® coolants and coolant concentrates in one catalogue. From high-quality coolant concentrates (P999 series) and ready-to-use coolants (P900 / P888) to windscreen washer fluid, windscreen de-icer and AdBlue – all developed without the addition of nitrites and phosphates and compliant with the specifications of individual vehicle manufacturers.