HEPU P888 Ready-Mix Coolant

The Culture of Cooling > HEPU P888 Ready-Mix Coolant
ARTICLE NUMBER - P888

Ready-to-use coolant that protects the engine against freezing, overheating and corrosion – no mixing, just fill.

Fluids Finder
Request pricehow to use
Description
Specification
How to use
Comparable quality standards
Safety
Download

HEPU® P888 Ready-Mix Coolant G11 (Blue)

HEPU® P888 is part of the P888 ready-mix range of HEPU® coolants for modern cooling systems. Supplied ready-to-use, it requires no dilution – simply fill the cooling system for year-round protection against freezing, overheating and corrosion.

P888 is the blue, G11-type ready-to-use coolant of the range, for use in aluminium and cast-iron engines. It offers protection against frost, corrosion, overheating and calcium (scale) deposits, and is especially recommended for undiluted use. Ready-to-use, it protects down to −25 °C.

Key features

  • Made in Germany. Manufactured under strict quality control – consistent and proven. 
  • Ready-to-use G11 formula. Free from nitrites, amines and phosphates – reliable protection with a proven inhibitor package.
  • No mixing required – supplied ready-to-use, eliminating the risk of an incorrect mixing ratio.
  • All-round protection against frost, corrosion, overheating and calcium deposits, down to −25 °C.
  • Meets Audi/VW G11 (TL 774A) and further manufacturer specifications (see Comparable Quality Standards).
  • Perfect match for HEPU® water pumps. One system, one manufacturer, full responsibility.

Benefits

  • Reliable engine protection all year round – against freezing, overheating, corrosion and scale, under all operating conditions.
  • Proven G11 protection – the nitrite-, amine- and phosphate-free formula protects metals and the whole cooling circuit.
  • Convenience and safety – ready-to-use, with no dilution step and no risk of wrong concentration.
  • Confidence in the right choice – meets the G11 (TL 774A) requirements of leading manufacturers, reducing the risk of incorrect selection.
  • German quality – one consistent, proven standard behind The Culture of Cooling.
  • Consistency with the HEPU® system – the perfect complement to HEPU® water pump kits: one system, one manufacturer, full responsibility.
Parameter Value
Product type Coolant / antifreeze — ready-to-use G11
Base Ethylene glycol (ethanediol) 25–<50 %
Inhibitor Silicate/hybrid inhibitor package (G11)
Colour Blue
Odour Mild
Density at 20 °C 1.0641 g/cm³
pH at 20 °C 8.4
Freezing point —
Boiling point 108 °C
Frost protection (ready-to-use) down to −25 °C
Flash point 111 °C
Auto-ignition temperature > 400 °C
Flammability Non-flammable
Vapour pressure Not determined
Solubility in water Miscible
Free of Nitrite, amine, phosphate
Application Engine coolant — ready-to-use, do not dilute

 

HEPU® P888 is ready-to-use and must not be diluted.

Method

  1. Do not add water or concentrate – the product is pre-mixed for protection down to −25 °C.
  2. Fill the cooling system directly with the coolant, bleed air from the circuit and check the level when the engine is cold.
  3. When switching from another coolant technology, flush the system before filling.
  4. Do not mix G11 with incompatible coolant types – if topping up, use the same specification already in the system.

Note: as a ready-mix, P888 provides fixed frost protection to −25 °C; no mixing-ratio table applies.

HEPU® P888 is recommended for use according to the following specifications and standards:

  • Audi/VW G11 – TL 774A
  • MB 325.0 / 325.2
  • BS 6580 (UK) · ASTM D3306
  • JIS K 2234 · UNE 26-361
  • AFNOR NF R15-601

Always confirm the coolant type and colour required by the vehicle manufacturer before topping up or mixing with another product.

SAFETY WARNINGS

Hazard-determining components of labelling:

ethanediol

Hazard statements

  • H373 May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.

Precautionary statements

  • P101 If medical advice is needed, have product container or label at hand.
  • P102 Keep out of reach of children.
  • P103 Read carefully and follow all instructions.
  • P260 Do not breathe mist/vapours/spray.
  • P314 Get medical advice/attention if you feel unwell.
  • P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

 

MANUFACTURER AND ENTITY RESPONSIBLE FOR PLACING THE PRODUCT ON THE MARKET

HEPU® Autoteile GmbH
Am Kreuzweg 2, 32689 Kalletal-Hohenhausen
Germany

 

Safety data sheet / Sicherheitsdatenblatt

SDB_HEPU_P888_(DE)

SDB_HEPU_P888_(EN)

Other files / Andere Dateien

HEPU Official Product Verification Notice – Coolants

Categories:

Watch on YouTube

HEPU Tech Academy

All HEPU Tech Academy materials are published on the HEPU® YouTube channel – free of charge, organised into structured series and useful at every stage of the repair process. At the workstation, before starting a repair. At the counter, when a customer asks a question. On a mobile device between jobs.

Subscribe to the channel to stay up to date with the latest installation procedures, new product developments and technical case studies.

HEPU® Coolant Catalogue

Discover the complete range of HEPU® coolants and coolant concentrates in one catalogue. From high-quality coolant concentrates (P999 series) and ready-to-use coolants (P900 / P888) to windscreen washer fluid, windscreen de-icer and AdBlue – all developed without the addition of nitrites and phosphates and compliant with the specifications of individual vehicle manufacturers.

Zaloguj się, aby pobrać ten plik.