HEPU P900-RXE30 Ready-Mix Coolant

The Culture of Cooling > HEPU P900-RXE30 Ready-Mix Coolant
ARTICLE NUMBER - P900-RXE30

Ready-to-use coolant that protects the engine against freezing, overheating and corrosion – no mixing, just fill.

Fluids Finder
Request pricehow to use
Description
Specification
How to use
Comparable quality standards
Safety
Download

HEPU® P900-RXE30 Ready-Mix Coolant (Renault/Dacia & Asian, Blue)

HEPU® P900-RXE30 is part of the P900 ready-mix range of HEPU® coolants for modern cooling systems. Supplied ready-to-use, it requires no dilution – simply fill the cooling system for year-round protection against freezing, overheating and corrosion.

P900-RXE30 is the blue, ready-to-use coolant of the range, based on a phosphated OAT (P-OAT) technology that gives optimum protection to the cooling system. It is particularly suitable for Renault / Dacia applications according to the GLACEOL RX Type D and Type E standards (except engines B4A / B4D) and for many Asian vehicles. Ready-to-use, it protects down to −30 °C.

Key features

  • Made in Germany. Manufactured under strict quality control – consistent and proven.
  • Ready-to-use P-OAT formula. Free from silicate, borate, nitrite and amine – a phosphated organic-acid package tuned for Renault/Dacia and Asian cooling systems.
  • No mixing required – supplied ready-to-use, eliminating the risk of an incorrect mixing ratio.
  • Permanent all-year protection against frost, overheating and corrosion, down to −30 °C.
  • Dedicated OE coverage – Renault/Dacia GLACEOL RX Type D/E, Nissan, Ford, PSA, MB and further standards (see Comparable Quality Standards).
  • Perfect match for HEPU® water pumps. One system, one manufacturer, full responsibility.

Benefits

  • Reliable engine protection all year round – against freezing, overheating and corrosion, under all operating conditions.
  • Right chemistry for Renault/Dacia and Asian systems – the phosphated OAT package meets specifications where phosphated coolants are required.
  • Convenience and safety – ready-to-use, with no dilution step and no risk of wrong concentration.
  • Confidence in the right choice – meets GLACEOL RX Type D/E and further OE requirements, reducing the risk of incorrect selection.
  • German quality – one consistent, proven standard behind The Culture of Cooling.
  • Consistency with the HEPU® system – the perfect complement to HEPU® water pump kits: one system, one manufacturer, full responsibility.
Parameter Value
Product type Coolant / antifreeze — ready-to-use (P-OAT)
Base Ethylene glycol (ethanediol) 25–<50 %
Inhibitor Phosphated organic acid (P-OAT) technology
Colour Blue
Odour Weak, characteristic
Density Not determined
pH 8.4
Freezing point —
Boiling point > 173 °C
Frost protection (ready-to-use) down to −30 °C
Flash point > 100 °C
Flammability Non-flammable
Vapour pressure Not determined
Solubility in water Fully miscible
Free of Silicate, borate, nitrite, amine
Recommended for Renault/Dacia (GLACEOL RX Type D/E, except B4A/B4D) and many Asian vehicles
Application Engine coolant — ready-to-use, do not dilute

 

HEPU® P900-RXE30 is ready-to-use and must not be diluted.

Method

  1. Do not add water or concentrate – the product is pre-mixed for protection down to −30 °C.
  2. Fill the cooling system directly with the coolant, bleed air from the circuit and check the level when the engine is cold.
  3. When switching from another coolant technology, flush the system before filling.
  4. Do not mix with incompatible coolant types – if topping up, use the same specification already in the system.

Note: as a ready-mix, P900-RXE30 provides fixed frost protection to −30 °C; no mixing-ratio table applies.

HEPU® P900-RXE30 is recommended for use according to the following specifications and standards:

  • Renault/Dacia GLACEOL RX Type D/E · 41-01-001 · RNES-B-00014 v2.1
  • Nissan RNES-B-00014 v2.1 · PSA B 71 1111
  • Ford WSS-M97B57-A1 · MB 325.7 · Fiat 9.55523
  • ASTM D3306-20 · ASTM D6210-17 · SAE / JIS K2234-2018
  • KS M 2142:2014 · UNE 26-361-88/1
  • GB 27943.1-2022 · GB 29743-2013

Always confirm the coolant type and colour required by the vehicle manufacturer before topping up or mixing with another product.

SAFETY WARNINGS

Hazard-determining components of labelling:
ethanediol

Hazard statements

  • H373 May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.

Precautionary statements

  • P101 If medical advice is needed, have product container or label at hand.
  • P102 Keep out of reach of children.
  • P103 Read carefully and follow all instructions.
  • P260 Do not breathe dust/fume/gas/mist/vapours/spray.
  • P314 Get medical advice/attention if you feel unwell.
  • P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Full details in the Safety Data Sheet (SDS), available for download.

 

MANUFACTURER AND ENTITY RESPONSIBLE FOR PLACING THE PRODUCT ON THE MARKET

HEPU® Autoteile GmbH
Am Kreuzweg 2, 32689 Kalletal-Hohenhausen
Germany

 

Safety data sheet / Sicherheitsdatenblatt

SDB_HEPU_P900-RXE30_(UK)

SDB_HEPU_P900-RXE30_(RU)

SDB_HEPU_P900-RXE30_(EN)

SDB_HEPU_P900-RXE30_(DE)

 

Other files / Andere Dateien

HEPU Official Product Verification Notice – Coolants

Categories:

Watch on YouTube

HEPU Tech Academy

All HEPU Tech Academy materials are published on the HEPU® YouTube channel – free of charge, organised into structured series and useful at every stage of the repair process. At the workstation, before starting a repair. At the counter, when a customer asks a question. On a mobile device between jobs.

Subscribe to the channel to stay up to date with the latest installation procedures, new product developments and technical case studies.

HEPU® Coolant Catalogue

Discover the complete range of HEPU® coolants and coolant concentrates in one catalogue. From high-quality coolant concentrates (P999 series) and ready-to-use coolants (P900 / P888) to windscreen washer fluid, windscreen de-icer and AdBlue – all developed without the addition of nitrites and phosphates and compliant with the specifications of individual vehicle manufacturers.

Zaloguj się, aby pobrać ten plik.